Dynalink A 0977A User Manual download pdf

Congratulations on purchasing the A 0977A 4 in 1Jumbo remote control. The unit can

program a range of devices including TVs, Set top boxes, DVDs, amplifiers, VCRs, PVRs,

CDs, etc. For the full range of compatible devices refer to the device code listing enclosed

with this product.

The remote control has 4 labelled device keys. These are TV, STB (Set top box), DVD and

AUX (Auxiliary). However, any type of device can be programmed into any button.

Instructions

Install batteries in unit (batteries not supplied - requires 2 x AA cells).

The battery compartment is on the rear of the unit. Insert batteries in direction indicated in

battery compartment.

Code Programming

The unit can be programmed in the following ways.

A. Inputting the brand code number.

1. Press and hold the device key button you want to program (eg TV, STB etc) for 3 seconds

until the LED indicator remains illuminated.

2. Release the device key.

3. Locate the brand code number from the code list supplied separately with this unit. Eg.

Akai 0043, 0067, 0070 etc. Now input this code. Once entered the LED will turn off.

4. If you input an incorrect code the LED indicator will flash twice. If this occurs simply go

back to step 1.

5. Test the operation of the remote control. If the first code for the designated appliance (eg

Akai 0043) does not work, or some functions do not work correctly, enter the next

appliance code (eg Akai 0067) until you are successful.

The device key code number can be checked as follows:

1.Press and hold the device key name you want to display (eg TV).

2.The LED indicator will flash once.

3.Whilst holding the device key, press the OK button, then release both buttons.

4.The LED indicator will now flash the number of times that corresponds to each digit of the

code, with a 1 second pause between each digit.

5.For example, if the code is 1038, the indicator will flash once, stop for 1 second, flash 10

times for the “0”, pause for a second, flash 3 times for the “3”, then flash 8 times for the

“8”.

6.When finished, the remote control will exit automatically.

A 0977A

Learning Jumbo Remote

Operating Instructions

1 2 3 4 5

Summary of Contents

Page 1 - Operating Instructions

1Congratulations on purchasing the A 0977A 4 in 1Jumbo remote control. The unit canprogram a range of devices including TVs, Set top boxes, DVDs, ampl

Page 2 - C. Using Auto Code search

2B. Using Code manual search.1. Press and hold the device key button you want to program (eg TV, STB etc) for 3 secondsuntil the LED indicator remains

Page 3

3KEY TV SAT DVD VCR AUX1DENONSONYKENWOODSONYSONYONKYODENONKENWOOD2PANASONICHITACHIPANASONICHITACHIPANASONICHITACHIPANASONICHITACHIPANASONICHITACHI3NEC

Page 4 - Jumbo Learning Remote

E. Using TV quick search (For TV programming).1. Press TV device key and release.2. Turn on TV using your existing remote.3. Press and hold “MUTE” but

Page 5 - To reset the remote

are received within 15 seconds, the unit will exit learning mode.NOTE 3.Except LEARN and device buttons, any button can be programmed, and programmed

Comments to this Manuals

No comments

Dynalink A 0977A User Manual

Browse online or download User Manual for Remote controls Dynalink A 0977A. Dynalink A 0977A User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Remote controls Dynalink A 0977A